Page 1 of 2

Another custom will be done soon saltwater machine King-coho killer

Posted: Thu Jun 18, 2009 6:28 pm
by swedefish4life1
3 scotties 1106 down-riggers = 2 color Garmin system rear decker and helm interfaced , air ride seats, remote kicker steering, GPS, VHF, CD and 4 speakers , 2 fish boxes with water features, wash down pumps, 2 battery systems , front and rear deck lights massive , 14 rod holders, hand held GPS and mount, 200 feet of rope and anchor system, lighted Richie compass, built in downrigger mounts into the boat, Yamaha T8 electric, power trim and tilt, dual wipers , propane heating system 2 side bench seats and about 10 more goodies:cheers:

July 16th blood and kill Kings :bounce: :chef: just say Yes!!!

Tight Lines fish on!!!!

Heading to custom graphics finishing full hard framed top which will be full black and cover all if needed and had 3 colors of metalic silvers on body

Trailer all tandeum =4 disc brakes:-$ :cheers:

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Thu Jun 18, 2009 7:41 pm
by fishaholictaz
It looked a little like a river boat at quick glance earlier:eye:

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Thu Jun 18, 2009 7:44 pm
by swedefish4life1
Deep progressive veeeeee tub Saltwater/offshore package


Coastal:-#

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Thu Jun 18, 2009 7:48 pm
by fishaholictaz
Wiskey:-$

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Thu Jun 18, 2009 9:16 pm
by sickbayer
wow got all the same features as my TunderJet except ive penn 835's and no wash down pump ;(

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Thu Jun 18, 2009 9:23 pm
by swedefish4life1
Bottom and design very differnt then a TJ:colors:

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Fri Jun 19, 2009 4:09 am
by sickbayer
Yeah i see that. I meant the options. But i do like the one above.....

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Fri Jun 19, 2009 2:50 pm
by Gisteppo
There isn't a radius to the hull, but she looks to be a nice warped plane hull. Thats a nice setup, esp with that Yam 150 on the back, should be a reasonably fuel miserly salt boat that rides well and won't break the bank.

What's she weigh Swede?

Why don't they extend their brackets to the chines instead of cutting it off in the center like that? Its free hull length and free lift that companies like Hewescraft have capitalized on over the past 5 years of boat design progression.

E

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Fri Jun 19, 2009 4:55 pm
by swedefish4life1
This tub is 20 times of any Hewescraft:-$ in desigh, materials used , bottom, hull integrity,structure and in 2 weeks anyone wants a ride and real life#-o events fishing and running any waters feel free.

Not even a close chevy/ford more like Vette to a pinto!:-$

I wont post the total weight dry weight means little in REAL LIFE LIFE STUFF E :cheers: and zero Puke and chuck buckets:-$ :-# needed we broke that by age 6 by doing:thumright =d>

Will weigh her loaded:-$ gas, oil, water, gear dry weight means little or nothing:-$ then adding mother nature and all she brings that is the score and the numbers needed:cheers:

Now SCHOOL:study: ((E)) :-$ REASON WHY THE OFF SHORE BRACKET IS AND WAS = CLEAN WATER NOT AIREATED/((OFF SHORE RACERS BY ((GILL)) THE MAN 35 YEARS AGO)).
$ :cheers:
HEWSCRAFT:-$ DESIGH RESPONDS LIKE TRIM TABS CHEAPER AND FASTER IN THE BUILD PROCESS IT HELPS PLANNING YES

THE TRUE OFF SHORE BRACKET TO GET THE PERFORMANCE ADVANTAGE= NEEDS TO BE SET BACK SO THAT THE PROP IS IN CLEAN WATER :-$ AS SOON AS THE WATER PASSES THE BOTTOM OF THE HULL ON EVERY BOAT:-$ = THE WATER COMES UP CAUSING AIREATION :-$ IMPACTING PERFORMANCE:-$

THIS DESIGH WILL RUN AND PERFORM IN CLEAN WATER ALWAYS !


PROGRESSIVE DEADRISE OFF THE BOAT BOTTOM FROM 18 DEGREES:-$ AT THE TRANSOM TO PLUS 50 DEGREES:-$ AT THE BOW!:-$

REVERSE CHIMES AND STRAKES:-$

BUILT EXTRA DEEP AND WIDE TO SUPPORT ALL WATERS PRESSED

AND EXTRA FREEBOARD TO HANDLE ALL



KEEL REINFORCED .250 INCH KEEL EXTRUSIONS:-$

DARE TO COMPARE:cheers:

LONGITUDINEL BOX GIRDER THICKNESS LOL#-o :-" :-# :-({|=

NEXT!:cheers:

When you post your project Stamped Done I will come over with our process 2 of them :-$ :cheers:

I will bring matches and extra fuel as well:colors: :clown: :cheers: :chef:

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Fri Jun 19, 2009 10:20 pm
by Gisteppo
Will weigh her loaded gas, oil, water, gear dry weight means little or nothing then adding mother nature and all she brings that is the score and the numbers needed
Weight does matter when you are talking about towing the boat to your destination. Looks like she will be easy to tow.
Now SCHOOL ((E)) REASON WHY THE OFF SHORE BRACKET IS AND WAS = CLEAN WATER NOT AIREATED/((OFF SHORE RACERS BY ((GILL)) THE MAN 35 YEARS AGO)).
$
HEWSCRAFT DESIGH RESPONDS LIKE TRIM TABS CHEAPER AND FASTER IN THE BUILD PROCESS IT HELPS PLANNING YES

THE TRUE OFF SHORE BRACKET TO GET THE PERFORMANCE ADVANTAGE= NEEDS TO BE SET BACK SO THAT THE PROP IS IN CLEAN WATER AS SOON AS THE WATER PASSES THE BOTTOM OF THE HULL ON EVERY BOAT = THE WATER COMES UP CAUSING AIREATION IMPACTING PERFORMANCE

THIS DESIGH WILL RUN AND PERFORM IN CLEAN WATER ALWAYS !
Im fully aware of the bracket and what it does. The question was why they don't go chine to chine instead of only having a small area of planing surface directly in front of the motor. The bracket Hewes ( and every other aluminum boat manufacturer from Specmar on down) uses adds some extra beam to that bracket, making it a wider, more effective planing surface. It gives more reserve buoyancy, more lift, cleaner water, more space, and an overall increase in the boat's apparent size in a seaway.
PROGRESSIVE DEADRISE OFF THE BOAT BOTTOM FROM 18 DEGREES AT THE TRANSOM TO PLUS 50 DEGREES AT THE BOW!
This is by far the best hull shape out there for a boat this size. They get bigtime points for using a warped hull with those dimensions. Not too deep, not too shallow.

E

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Sat Jun 20, 2009 9:26 am
by swedefish4life1
This tub is light years ahead in 22 ft CLASS = Metal of MANIPULATION of metals:-$ the materials used,the tools used to support this build:-$ and will perform and fish very close to the Glass (Seaport):-$ that I have put 3,000 hours on every water:-$ every ocean condition :-$ and is rated one of the best Glass tubs made PERIOD by Pros:-$ :cheers: .

The others you talk of will work for many are in fact (entry level) builds:-$ , concepts:-$ , materials:-$ , grades and thickness, products , fit and finish and tons more.:-$


Real working weight in the salt is a your friend not your enemy as wind and waves without it will defeat you before your game even begins.:-$

1,500lbs 140omc#-o :clown: :-$

The same process in custom sleds in bow sheer and more


I can break it all down staring with the bottom the Radical Progressive VVVV the . 250 custom bottom :-$ compare not even close.:cheers:

The boat fully loaded DOING REAL LIFE will be way under the weights of any 22ft Glass tub fitted the same that is of Seaport, Grady-White standards and there standards are 2nd to none as well.:-$

I will quess the 22 fter loaded for just under 3,500lbs but I don't quess will wait until she is locked and loaded REAL LIFE

Will weigh her gased, oiled and packed not before and and 3/4 ton 4x4 truck can tow her with ease AS TOWING should be with trucks :-$ set up for work:-$ , airbags:-$ , oil, tanny coolers:-$ , beefed shocks:-$ and more full framed towing machine zero bolt on's not Grocery haulers WORK AND PERFORMANCE MACHINCES

This tub will humble:-$ any 22ft metal tub in the industry in Real open Ocean condtions and I wanted a 250 hp as I ask for more the 150 Yamaha 4 stroke will be the best fit for the $$$ worked/gas used and the T-8 full remote not a goof in the rain holding a tiller handle:brilsmurf :colors:

As a true pencil neck:-$ Alice call me Copper 8-[ Schools out for the summer :thumleft: :thumright bring anything you have wood, Hewestoloose I will show you why and how fast and direct you to the correct answer from doing Not talking on a PC :viking: :sunny: and the paint is bullet proof due to the materials used and zero bare half paints CHEAP:thumbdown on these tubs as rubbing the sides or sharkhide is lame be right the first as the choices are out there if you knew the game from age 6 on and I do!

Coast gaurd licence , guide license, Captain and more and if God choose to grant me life and more

I will roar and try again thats what fighters do](*,)

Just like the monster landing craft build it will be the best it can be in that design and market and its the 1st done with the material used motor and pump and more for a REC TUB THAT WILL DO ANYTHING ASKED OF HER

QUADS, BEARS, MOOSE, SPORT FISHING OPEN OCEAN OR RUNNING THE MIGHTY YUKON WHERE A MISTAKE IN CHOICES CAN BE YOUR LIFE[-( [-x NOT POUNDING A PC :thumbdown FULL OF BEANS! Backed with nothing but words=d>

Tight lines fish on Name the dates that custom your working is coming will film all and will start not finish pushing hard and fast the open Straits


Please list all the bass boats??
Custom sleds?
Ocean boats? you have owned and where you used them in your order as it will be a book!8-[ :study:

lol

'After reviewing these great builds will chatter some but my quess is Chucker Buckets:-$ :clown: in zero waters tells the real story and not riding in a few times in others :cheers:

Fish and build on:cheers: weight, length, width and HP :-$ backed with awesome bottoms and tricked out work benches win Fish wars , hunting wars never words and to get this your history must have came from doing as a puppy to a old fart!!!:cyclopsan :cheers:
Who still eats 30 year olds for snacks:colors: :chef: :-#

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Sat Jun 20, 2009 10:57 am
by Hal
Why is it that whenever someone asks you a simple question, you have to come back with a reply that sounds like its coming from a 5 year old. Not to mention every time someone disagrees with you , they apparently have no possible CLUE as to what they are talking about. There is a word that describes that, but I can't post it.

Take people comments as constructive ideas, and maybe you wouldn't be complaining about your head being to big for your hat.


Not to mention that you are not doing a great job if you are trying to advertise these boats, which are very nice. I don't think anyone would want to deal with someone of your arrogance when going to buy a boat.


Oh great now I'm just another hater pounding on a PC... You do realize that is all you ever do, right?

Calm down...

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Sat Jun 20, 2009 11:15 am
by swedefish4life1
Number 1 at pressing these builds:-$ and in fact the greatness sells itself with one ride.

Hal point taken and settled down:-$ :cheers:

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Mon Jun 22, 2009 7:59 pm
by sickbayer
So the real bloody question here sweede is what does it cost joe blogs to go out and buy the dogs bollocks of the boat pictured above. Let me see if it is in my price bracket or am i really that poor.

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Mon Jun 22, 2009 8:18 pm
by swedefish4life1
Retail and me 2 differnt games:-# PM me and what your needs and wants and options change the game and fast:cheers:

Fish on!

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Mon Jun 22, 2009 9:08 pm
by curado
cant wait til i get my own custom sled for the rivers

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Mon Jun 22, 2009 9:15 pm
by DaKanati
ok all I want to know is if Im holding my tiller handle and its not raining... am I still a goof?

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Mon Jun 22, 2009 9:18 pm
by curado
no, i would rather run a tiller especialy for in the rivers more control

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Tue Jun 23, 2009 4:27 am
by sickbayer
you have to hold on to it on the rivers mate a tr1 wont be nearly half as response as quickly as you need it to although remote steer is a must IMO. and i wouldnt be without it on my boat.

RE:Another custom will be done soon saltwater machine King-coho killer

Posted: Tue Jun 23, 2009 5:34 am
by fishaholictaz
My guide buddy down in Oregon runs his boat by tiller he says it is the best for the fast shallow rivers. He is not a fan of steering wheels when fishing in his sled....