building a new pontoon.

VHMLLC · Post by **VHMLLC** » Fri Aug 08, 2008 9:10 pm

im building a new standing pontoon from my ODC classic 8ft pontoon. trial and error. but turning out cool. here is the rough draft.

Marc Martyn · Post by **Marc Martyn** » Fri Aug 08, 2008 9:29 pm

Interesting. Looks great. Won't that restrict you to using oars only though?

VHMLLC · Post by **VHMLLC** » Sat Aug 09, 2008 4:04 pm

what oars? never installed them on the toon. i bought a minn 30# and i cruise very well. this is the frame in paint stage. notice the square block on the front (closest to the bottom) thats the motor mount. the frame is now ridged. the new square tubes in the middle are to support me fat carcus.

the oar mounts are for the tackel box mount on one side and fishing buddy on the other side.

before i tore it apart i was out at la camas and over heard a dad telling his son's "thats a floating arm chair".
i laughed my butt off and snickered the rest of the day.

:viking:

topdawg47 · Post by **topdawg47** » Sat Aug 09, 2008 4:44 pm

vancouverhandyman: Do you sell poontoon's?

I've been searching hard for either a float tube or poontoon? I'm looking at purchasing a used one more than likely, just in case I don't like it...

VHMLLC · Post by **VHMLLC** » Sat Aug 09, 2008 5:10 pm

topdawg47 wrote:vancouverhandyman: Do you sell poontoon's?

I've been searching hard for either a float tube or poontoon? I'm looking at purchasing a used one more than likely, just in case I don't like it...

not yet still playing with the ones i have.
i have two odc classics that i'm modifying to meet my needs.this is a hobby for me. if it takes off great. i can tell you that you can get a pontoon from the web, for under $250.00

:viking:

Chin_nook · Post by **Chin_nook** » Sat Aug 09, 2008 5:41 pm

I was thinking of doing something similar to my ODC Sport 8'. So how much extra weight did you add to it? Is that Aluminum Plating your using? Would you mind sharing the thickness? Also and never crossed my mind...placing the trolling motor mount up front...did you reverse the head of the trolling motor ?

I am 5'9 and weigh about 165lbs. When I place a trolling motor on my toon, I have to really place the frame pretty far forward on the bladders or else I look like I am pulling some serious plane on the lake. Is that what compelled you to do this project?

VHMLLC · Post by **VHMLLC** » Sat Aug 09, 2008 8:00 pm

Chin_nook wrote:I was thinking of doing something similar to my ODC Sport 8'. So how much extra weight did you add to it? Is that Aluminum Plating your using? Would you mind sharing the thickness? Also and never crossed my mind...placing the trolling motor mount up front...did you reverse the head of the trolling motor ?

I am 5'9 and weigh about 165lbs. When I place a trolling motor on my toon, I have to really place the frame pretty far forward on the bladders or else I look like I am pulling some serious plane on the lake. Is that what compelled you to do this project?

answer, about 30 pounds 1/8 inch alum plate (freightliner) and 1" thin walled square tube. i removed the seat brackett and welded my own up that would displace the weight. yes i reversed the head the head..

yes and no, i wanted to try standing thats what they do on the bass boats, i had it rigged for sitting . the battery sat behind the seat (7"riser on the seat) to balance the trolling motor on the front . it was very stable in the water i took 2.5 foot rollers at mayfield lake and fun ride.. im 5'9" 220 and still had 2" under the "plate". this is a very stable platform to work with. if any one wants info email me. the bottom picture is the first motor mount.

:viking:

Marc Martyn · Post by **Marc Martyn** » Sat Aug 09, 2008 9:32 pm

It looks great! Show us the finished product on the water. You may really have something there.

VHMLLC · Post by **VHMLLC** » Sun Aug 10, 2008 12:51 pm

hopefully next weekend at willapa bay.

:viking:

VHMLLC · Post by **VHMLLC** » Sun Aug 10, 2008 8:32 pm

more updated photo. i took the bar off it was to far forward even on the grass. put hte seat back on with a tall seat post. will see how it does tomorrow night at battle ground.

:viking:

VHMLLC · Post by **VHMLLC** » Fri Aug 15, 2008 1:30 pm

Marc Martyn wrote:It looks great! Show us the finished product on the water. You may really have something there.

nope tryed it monday night it was alittle to unstable for my tastes. but it very nice to step onto the boat from a dock and not have to wear waders.

:viking:

papamike · Post by **papamike** » Fri Aug 15, 2008 4:24 pm

what about making it a little wider

Marc Martyn · Post by **Marc Martyn** » Fri Aug 15, 2008 7:48 pm

vancouverhandyman wrote:
Marc Martyn wrote:It looks great! Show us the finished product on the water. You may really have something there.

nope tryed it monday night it was alittle to unstable for my tastes. but it very nice to step onto the boat from a dock and not have to wear waders.

:viking:

I was wondering about that. I think you have to have a two man boat for it to be stable enough for you to stand up in. Mike Carey has a two man boat. He posted pictures of it on a thread that I can't remember.

VHMLLC · Post by **VHMLLC** » Sun Aug 17, 2008 7:49 pm

papamike wrote:what about making it a little wider

you could make it wider but your already at close to 60" to the outside of the bladders.the seat platform is 24" wide by 48 " long. adding the flool was awsome you can put your feet anywhere instead of just the stirrups.

papamike · Post by **papamike** » Mon Aug 18, 2008 5:21 pm

Looks real good. what about some thing like out riggers to add after its at the lake or in the water? My brother did that with his canoe so his wife would fish with him.

bassmasterderek · Post by **bassmasterderek** » Mon Aug 18, 2008 5:56 pm

Thats a good lookin pontoon, keep at it!

leahcim_dahc · Post by **leahcim_dahc** » Mon Aug 18, 2008 5:58 pm

Define unstable....is it unstable side to side, or front to rear? I have a single seat pontoon that I stand up on a regular basis and don't seem to have much trouble with regards to balance. I do notice a slight difference when weighted down with a cooler, battery and gear and when not. But overall, it is quite stable.

How is the weight distribution across the pontoons? If you could swing it, you may get a good idea of weight distribution by loading up the pontoon just as it were going to be used and set it on bathroom scales (4 ea.). One in each corner and see where the most weight is and adjust from there. Might even check it while standing on it, and not just to see the difference.

Just food for thought...

VHMLLC · Post by **VHMLLC** » Mon Aug 18, 2008 6:09 pm

unstable might not have been the best word. it was not to my liking but i could stand up and cast. i like the seat stand (18" bass style) it hits me at the knees and works as a leaning bar for stabliablty. the weight dist, was perfect. battery in the rear under the seat and the trolling motor on thefront. the bladders were a little low that day but it was fun .

:viking:

leahcim_dahc · Post by **leahcim_dahc** » Mon Aug 18, 2008 6:16 pm

oh, ok...I'm trackin' now. :-D

The 'toon looks good, well put together and I have been looking at it trying to figure out what would cause it to be unstable. I misinterpreted what you were saying. Keep up the good work on the 'toon. :thumleft:

VHMLLC · Post by **VHMLLC** » Mon Aug 18, 2008 6:30 pm

the frame go's to powder coat this week the floor and rack go to rhino liner.
now i have to build a carry rack for the back of the rv trailer.

:viking:

Northwest Fishing Reports

building a new pontoon.

building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.

RE:building a new pontoon.